444 63 78
Kullanıcı Kullanıcı girişi veya kullanıcı kayıdı Üye ol
Email :
Parolanız :
TURTurk_FlagENenglish_flag
Duyurular
Seslendirme Ürünleri 07.06.2020

Fiyat Listelerimiz Güncellenmektedir..

Otomasyon Ürünleri 29.05.2018

Otomasyon Çözümlerimiz ve Otomasyon ürünlerimizi görmek için otomasyon sistemleri linkimize tıklayınız. 444 6 378

Anons Ürünleri 07.06.2020

Fiyat Listelerimiz Güncellenmektedir.

Sipariş Formu 29.05.2018

Sitemiz üzerinden sipariş formu gönderebilirsiniz. 444 6 378

  • The new structure for the generation of the magnetic field, the innovative route of the signal generated by the electrodes, provide a sensor with an extremely wide measurement range: EL= Extended Linearity.
  • The MUT2770 sensors are suitable for wide pipes under maximum pressure of 16 bar in the standard version (as indicated in Table 1 and 2). They are made of a 47mm probe, which has to be inserted into the tube for 1/8 of its internal diameter. As all magnetic meters, they can be used to measure liquids flow rates with electrical conductivity of 5 μS/cm minimum.
  • Better than 1% linearity.
  • ±0.2% of repeatability.
  • ±1% of accuracy at velocity above 0.6ft/s (0.2m/s).
  • Positive / negative / net flow totalizer.
  • Proprietary low-voltage transmission and self-adaptation technologies.
  • Anti-interference design.
  • Dual CPU. 100 Pico-second time measurement resolution.
  • Program both outputs together or independently, with either an upward or a downward analog output slope
  • Remote TEACH input for security and convenience
  • Choose models with 150 mm to 1 m range (7.9" to 39.4") or 300 mm to 2 m range (11.8" to 78.7")
  • Wide operating temperature range of -20° to +70°C (-13° to +158°F)
  • Choose models with NPN or PNP discrete output, plus 0 to 10V dc or 4 to 20 mA sourcing analog output
  • SPDT electromechanical relay for high-capacity switching
  • Universal supply voltage: 85 to 264V ac / 24 to 250V dc
  • Rugged encapsulated design for harsh environments
  • Models available with factory-installed Teflon® flange and film coating bonded over the transducer for protection from harsh environments.
  • Unique housing design allows for multiple mounting configurations
  • Choose models with integral 2 m (6.5') or 9 m (30') cable, or with
  • Compact desig
  • Protection type IP 68 (up to 200m depth)
  • Corrosion resistant stainless steel design
  • PVC,PUR,PE shealted cable with inner
  • ventilation
  • Option : PTFE Body for corrosive liquids
  • 26 W serisi sensörler 10 serisi Standard olarak AISI 316 L paslanmaz çelik gövde içine konulmuş piozoresistive kapsüllerden yapılmıştır.Aşındırıcı akışkanlar için hastelloy veya farklı metallerden opsiyonel olarak diyafram temin edilebilir.
  • The Series 21 R is offered with soldered brass transducers (Series 21 MR), soldered steel
  • The Y-line transmitters have an extremely small temperature error. This is achieved using an additional circuit containing a temperature sensor that subdivides the temperature range into fields that are 1,5 Kelvin (K) wide. The TK zero and TK compensation values are calculated for each field and programmed into the additional circuit. During operation, these values are fed into the analogue signal path depending on the temperature.
  • Rigid process connection, non-rotatable body
  • Reading of adjusted values without tools
  • Secure programming through recessed pushbutton and keylock
  • Permanent indication of pressure (bar,psi, kPa, MPa, misc)
  • Peak pressure memory
  • The easy-to-navigate user interface speaks nine languages. You also get access to features such as:
  • automatic self-adaption calibration
  • manual or automatic temperature compensation
  • logbook function.
  • Parameter group 1
  • chlorine
  • chlorine dioxide
  • ozone
  • hydrogen peroxide.
  • Parameter group 2
  • pH
  • Optimize edilmiş akışlı hücreleri sayesinde kararlı ölçümler
  • Kolaylıkla kurulan önceden monte edilmiş akış sistemi
  • En uygun işletim için özel aksesuarlar
  • Otomatik temizleme sayesinde en az bakım gereksinimi
  • SC kontrol üniteleri ile tak ve çalıştır
  • İçme suyu: yer altı suyu
  • deniz suyu(desalinasyon)
  • dağıtım şebekesi ve yüzey suyu
  • Proses suyu: kazan ve soğutma sistemleri
  • yiyecek ve içecek: Atık ve geri kazanım suyu
  • Genis ölçüm araligi: 0 - 14 pH, ±1500 mV redoks
  • Dahili Pt100 sicaklik sensörü sayesinde hizli kompenzasyon
  • Optimize edilmis sensör ömrü
  • çift köprü sayesinde kirlilige karsi artirilmis direnç
  • Gövde ve baglantilarin güçlü kimyasal direnci,cam ölçüm hücresi fiziksel darbelere karsi korumali
  • Az bakim ihtiyaci : Jel dolgulu kombinasyon elektrot
  • Dahili, sinyallerden etkilenmeyen kablo (10 m/33 ft)
  • Geniş ölçüm aralığı
  • 0.0001 - 1.000 FNU
  • Kalıcı fabrika kalibrasyonu
  • Ölçüm odasının kendi kendini temizleme özelliği
  • Gerektiğinde diğer SC problarıyla kombine edilebilir
  • No calibration
  • Proven cleaning system
  • Combinable with probes for O2, NO3, pH, etc.